Thor V75 | V85 | V95 RS

Isodiametric tractors, monodirectional or reversible, with steering wheels. 70, 79 or 91 hp

Tractors only for Countries which do not foresee engines in Phase 3B emission level.


The Thor RS are multi-purpose specialized tractors, particularly performing in vineyards, orchards, nurseries cultivations and greens maintenance

The low centre of gravity, the all-wheel drive and the rigid frame with front-wheel steering provide outstanding stability and unmatched road grip, allowing Thor RS to work in complete safety both on flat and uneven, sloping grounds.

The reversible driving position (available as optional for Thor V75) allows to operate practically and rationally both with towed and front attachments.

Three VM engines are available for the Thor: a 70 hp three cylinder engine (Thor V75), a 79 hp four cylinder engine (Thor V85) and a 91 hp four cylinder engine (Thor V95), all with EGR System located inside the engine.

The decision to use a lower number of rpms, 2300 rpm/min was conceived to reduce consumption, noise level and vibrations, with the benefit of comfort.

More Information

Engine

Model Power KW/HP Nominal speed (rpm) No. of cylinders Displacement (cm3) Aspiration Maximum torque (Nm/rpm)
Thor V75 51,5 / 70 2300 3 2230 Turbo Intercooler 265 / 1200
Thor V85 58 / 79 2300 4 2970 Turbo 274 / 1800
Thor V95 67 / 91 2300 4 2970 Turbo Intercooler 420 / 1000

Transmission and gearbox

The transmission of Thor is fitted with the OS-FRAME chassis

The structure with cantilevered engine allows for a very low centre of gravity without sacrificing ground clearance. 

A joint in the middle of the machine lets the front axle oscillate up to 15° with respect to the rear axle, for excellent stability on slopes.

The 32-speed synchronised gearbox (16 FWD + 16 REV) with synchronized reverser always allows right gear selection for the tasks for which the tractor is intended to.

The 'Long Life' clutch is multidisc in oil bath and requires no maintenance.

The Thor are equipped with planetary gear axles to minimize wheelbase of the tractor and increase its manoeuvrability.

The permanent 4-wheel drive allows exploiting the machine’s towing feature.

Pto and hydraulic system

The rear PTO is independent from the gearbox and synchronized with all progress speeds. PTO can be engaged by an electro-hydraulic control, it has a speed of 540/540E rpm or, as optional, 540/1000 rpm. 

The clutch is multidisc in oil bath.

The solid rear hydraulic lift by rams (optional with position and draft control) relies on multi-purpose practical and versatile couplings to adapt quickly and easily to all marketed equipments.

As optional, it is also available a performing front lift which is necessary when using combined attachments.

The hydraulic system consists of a double circuit with two independent pumps and dedicated heat exchanger: the hydroguide pump has a flow rate of 28,5 l/min, like the one for the lift and distributors. As optional a 49 l/min oversize pump is available.

Active and passive safety

The braking system with multi disc wet brakes, act on the rear transmission.

Front and rear differential lock, electro-hydraulically controlled, allows the tractor to be always in traction.

The roll-bar and the safety belts on the seat protect the operator.

Driving position

The driving position is custom-fitted on the driver with ergonomic controls placed to be easily found and activated by the operator.

From the seat the operator enjoys a complete view both on the machine and on the attachments.

The digital display guarantees the total control of the unit.

The hydrostatic steering ensures maximum maneuverability and low turning radii.

In the reversible version, a few seconds are required to rotate by 180° the seat, the steering wheel and the console so that the operator may work having the equipment in front of him and constantly be able to control the operations.